Stick transparency

From PyMOLWiki
Revision as of 17:00, 28 August 2008 by Inchoate (talk | contribs)
Jump to navigation Jump to search

Overview

The setting "stick_transparency" allows one to set the degree of transparency for stick objects, independent of all other objects. Allowable values range from 0 (fully opaque) to 1 (fully transparent, i.e. invisible).

Usage

set stick_transparency, F, selection

where F is a floating point number in the range [0.0 - 1.0], where selection is the selected surface to apply the change to (for examples, see below).

For the value of F, 1.0 will be an invisible and 0.0 a completely solid surface.

if selection is omitted, then the transparency of all stick representations will be changed.

Examples

set stick_transparency, 0.50   # Makes sticks 50-percent transparent

Open the images to actually see the details!

Note

Stick transparency works best with "unilayer" transparency (Setting menu > transparency > Unilayer) rather than "multilayer", which leads to odd artifacts where the sticks join.